configuratie van smartcard.config in acamd met ziggo en irdeto smartcard + E30TC

[charlyd]

hoi kan iemand mij helpen met de juiste config in mijn smartcard.conf bestand voor acamd.
ik heb al vanalles geprobeerd maar beeld blijft zwart.
dit zijn gegevens van de smartcard info van de anysee CNO driver:
interface version: 0x06
number of sessions: 4
language: NLD
CA SYS ID: 0x0602
ik heb een Irdeto smartcard van ziggo in mijn anysee E30 combo plus tuner.

en hier een stukje logging:

Code:

00:35:33.697: ACamd v0.6.2.0
00:35:33.713: MD-API Version 01.06
00:35:33.721: systems: registering CA system Cardclient, pri -15, ident 1000
00:35:33.721: structloaders: registering loader cardclient config
00:35:33.721: cardclients: registering cardclient Newcamd
00:35:33.721: cardclients: registering cardclient Newcamd2
00:35:33.721: cardclients: registering cardclient CCcamN
00:35:33.721: cardclients: registering cardclient Radegast
00:35:33.721: cardclients: registering cardclient Camd35
00:35:33.721: structloaders: registering loader smartcard data
00:35:33.722: systems: registering CA system SC-Irdeto, pri -10, ident 1001
00:35:33.722: feature: using feature SMARTCARD
00:35:33.722: registering Irdeto smartcard (id 49726474)
00:35:33.722: systems: registering CA system SC-Seca, pri -10, ident 1002
00:35:33.722: registering Seca smartcard (id 53656361)
00:35:33.722: systems: registering CA system SC-Viaccess, pri -10, ident 1003
00:35:33.722: registering Viaccess smartcard (id 56696173)
00:35:33.722: systems: registering CA system SC-Conax, pri -10, ident 1004
00:35:33.722: registering Conax smartcard (id 436f6e78)
00:35:33.722: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
00:35:33.722: registering Cryptoworks smartcard (id 4372576f)
00:35:33.722: systems: registering CA system SC-Nagra, pri -10, ident 1006
00:35:33.722: registering Nagra smartcard (id 4e616772)
00:35:33.722: systems: registering CA system SC-NDS, pri -10, ident 1007
00:35:33.722: registering NDS smartcard (id 56694732)
00:35:33.728: Monitor listen on port 59921
00:35:33.761: Engine [MD-API]
00:35:33.761: loading smartcard data from C:\Program Files (x86)\DVBLogic\DVBLink\sources\TVsource_E30TC_1\Plugins\smartcard.conf
00:35:33.762: loaded 1 smartcard data from C:\Program Files (x86)\DVBLogic\DVBLink\sources\TVsource_E30TC_1\Plugins\smartcard.conf
00:35:33.762: loading cardclient config from C:\Program Files (x86)\DVBLogic\DVBLink\sources\TVsource_E30TC_1\Plugins\cardclient.conf
00:35:33.762: ** registered systems:
00:35:33.762: ** SC-NDS            (pri -10)
00:35:33.762: ** SC-Nagra          (pri -10)
00:35:33.762: ** SC-Cryptoworks    (pri -10)
00:35:33.762: ** SC-Conax          (pri -10)
00:35:33.762: ** SC-Viaccess       (pri -10)
00:35:33.762: ** SC-Seca           (pri -10)
00:35:33.762: ** SC-Irdeto         (pri -10)
00:35:33.762: ** Cardclient        (pri -15)
00:35:33.762: ANYSEE0: open serial port
00:35:33.762: Anysee Version: 3145728
00:35:33.773: Anysee Number Of Devices: 1
00:35:33.789: smartcards: added serial port ANYSEE0 as port 0 (normal CD, normal RESET, CLOCK 3571200)
00:35:33.789:
00:35:34.050: 0: new card inserted
00:35:34.050: 0: reseting card
00:35:34.050: 0: direct convention detected
00:35:34.050: 0: atr decoding TS=3b hist=15 Y1=90 TA1=21 F=558 D=1.000000 TD1=0e T=14 Y2=00
0: historical: 49 52 44 45 54 4f 20 41 43 53 20 56 35 2e 33
0: historical: 'IRDETO ACS V5.3
Blocked 2 same messages...
00:35:34.051: 0: atr checksum ok
00:35:34.051: 0: indicated wwt(T0)=1500 ms, bwt(T1)=1600 ms (at 3.5712 MHz)
00:35:34.051: 0: Init Irdeto card
00:35:34.051: 0: use Irdeto (at 6.0000 MHz) recalculated baudrate 10752
00:35:34.157: ACS Version 0606, CAID 0602, CoCo NLD
00:35:34.218: ASCII serial 4108496251U8270000A
00:35:34.275: Providers: 4 HEX Serial: 0B3886  HEX Base: 1C
00:35:34.930: didn't find Irdeto card specific certificate, falling back to default
00:35:34.930: didn't find default Irdeto certificate, please add one
00:35:34.930: now switch to Plain
00:35:35.051: 0: unknown (status: 00 92)
00:35:35.051: card didn't give a proper reply (buggy RSA unit?), trying to continue...
00:35:35.335: 0: CAM string rejected (status: 57 00)
00:35:35.335: camkey error
00:35:35.335: 0: can't initialise new card, ignoring port until card reinserted
00:35:57.200:
00:35:57.200: Ch: 240 - Nederland 3
00:35:57.200: Programm crc: 8FDE91D5
00:35:57.200: PMT: ACamd_PMT.txt, search, not found PMT=00F0 (AND SID=1F43)
00:35:57.201: 0x00F0 0x1F43 0x0604 0x00000000 0x0FA1 0x0035 11111110
00:35:57.334: Incomming PackageSize [184]
00:36:19.450:
00:36:19.450: Ch: 180 - Nederland 2
00:36:19.450: Programm crc: 784F0A11
00:36:19.450: PMT: ACamd_PMT.txt, search, not found PMT=00B4 (AND SID=1F45)
00:36:19.450: PMT: chcache.ini, 00B4,1F45,0604,00000000,0FA3,0035,Nederland 2
00:36:19.451: 0x00B4 0x1F45 0x0604 0x00000000 0x0FA3 0x0035 11111110
00:36:20.545:
00:36:20.545: Ch: 100 - Nederland 1
00:36:20.545: Programm crc: 3F14072C
00:36:20.545: PMT: ACamd_PMT.txt, search, not found PMT=0064 (AND SID=1F44)
00:36:20.545: 0x0064 0x1F44 0x0602 0x00000000 0x0000 0x0030 11111110
00:36:24.840:
00:36:24.840: Ch: 180 - Nederland 2
00:36:24.840: Programm crc: 784F0A11
00:36:24.840: PMT: ACamd_PMT.txt, search, not found PMT=00B4 (AND SID=1F45)
00:36:24.841: PMT: chcache.ini, 00B4,1F45,0604,00000000,0FA3,0035,Nederland 2
00:36:24.841: 0x00B4 0x1F45 0x0604 0x00000000 0x0FA3 0x0035 11111110
00:36:40.073:
00:36:40.073: Ch: 100 - Nederland 1
00:36:40.073: Programm crc: 3F14072C
00:36:40.073: PMT: ACamd_PMT.txt, search, not found PMT=0064 (AND SID=1F44)
00:36:40.073: 0x0064 0x1F44 0x0602 0x00000000 0x0000 0x0030 11111110
00:36:41.301:
00:36:41.301: Ch: 180 - Nederland 2
00:36:41.301: Programm crc: 784F0A11
00:36:41.301: PMT: ACamd_PMT.txt, search, not found PMT=00B4 (AND SID=1F45)
00:36:41.301: PMT: chcache.ini, 00B4,1F45,0604,00000000,0FA3,0035,Nederland 2
00:36:41.301: 0x00B4 0x1F45 0x0604 0x00000000 0x0FA3 0x0035 11111110

wie kan mij meer vertellen hoe dit werkt??
eventueel uitleggen hoe dit zie hieronder tot stand komt...(ook al werkt ie OOK NIET)
stond in mijn smartcard.conf bestand:

Code:

irdeto: [0602] camkey 0102030405060708 8D826BA96BD7578E99700913FF578A572EA05BEE8FC5F41127C04518DD1116CBCF09700D4E53C0EC37C77C1E3A5B2D735DC1B893410634168D2B5E2340896B69

[MyTheory]

Verander die 0602 eens in 0606 en herstart je MCE.

[GuiltyNL]

Zo te zien is dat de oplossing inderdaad.

[charlyd]

jammer nog zwart beeld.....

hier de nieuwe logging

Code:

21:14:53.097: ACamd v0.6.2.0
21:14:53.112: MD-API Version 01.06
21:14:53.144: systems: registering CA system Cardclient, pri -15, ident 1000
21:14:53.144: structloaders: registering loader cardclient config
21:14:53.144: cardclients: registering cardclient Newcamd
21:14:53.144: cardclients: registering cardclient Newcamd2
21:14:53.144: cardclients: registering cardclient CCcamN
21:14:53.144: cardclients: registering cardclient Radegast
21:14:53.144: cardclients: registering cardclient Camd35
21:14:53.144: structloaders: registering loader smartcard data
21:14:53.144: systems: registering CA system SC-Irdeto, pri -10, ident 1001
21:14:53.144: feature: using feature SMARTCARD
21:14:53.144: registering Irdeto smartcard (id 49726474)
21:14:53.144: systems: registering CA system SC-Seca, pri -10, ident 1002
21:14:53.144: registering Seca smartcard (id 53656361)
21:14:53.144: systems: registering CA system SC-Viaccess, pri -10, ident 1003
21:14:53.144: registering Viaccess smartcard (id 56696173)
21:14:53.144: systems: registering CA system SC-Conax, pri -10, ident 1004
21:14:53.144: registering Conax smartcard (id 436f6e78)
21:14:53.144: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
21:14:53.144: registering Cryptoworks smartcard (id 4372576f)
21:14:53.144: systems: registering CA system SC-Nagra, pri -10, ident 1006
21:14:53.144: registering Nagra smartcard (id 4e616772)
21:14:53.144: systems: registering CA system SC-NDS, pri -10, ident 1007
21:14:53.144: registering NDS smartcard (id 56694732)
21:14:53.159: Monitor listen on port 60661
21:14:53.237: Engine [MD-API]
21:14:53.237: loading smartcard data from C:\Program Files (x86)\DVBLogic\DVBLink\sources\TVsource_E30TC_1\Plugins\smartcard.conf
21:14:53.253: loaded 3 smartcard data from C:\Program Files (x86)\DVBLogic\DVBLink\sources\TVsource_E30TC_1\Plugins\smartcard.conf
21:14:53.253: loading cardclient config from C:\Program Files (x86)\DVBLogic\DVBLink\sources\TVsource_E30TC_1\Plugins\cardclient.conf
21:14:53.253: ** registered systems:
21:14:53.253: ** SC-NDS            (pri -10)
21:14:53.253: ** SC-Nagra          (pri -10)
21:14:53.253: ** SC-Cryptoworks    (pri -10)
21:14:53.253: ** SC-Conax          (pri -10)
21:14:53.253: ** SC-Viaccess       (pri -10)
21:14:53.253: ** SC-Seca           (pri -10)
21:14:53.253: ** SC-Irdeto         (pri -10)
21:14:53.253: ** Cardclient        (pri -15)
21:14:53.253: ANYSEE0: open serial port
21:14:53.253: Anysee Version: 3145728
21:14:53.331: Anysee Number Of Devices: 1
21:14:55.374: smartcards: added serial port ANYSEE0 as port 0 (normal CD, normal RESET, CLOCK 3571200)
21:14:55.374:
21:14:55.895: 0: new card inserted
21:14:55.895: 0: reseting card
21:14:55.895: 0: direct convention detected
21:14:55.895: 0: atr decoding TS=3b hist=15 Y1=90 TA1=21 F=558 D=1.000000 TD1=0e T=14 Y2=00
0: historical: 49 52 44 45 54 4f 20 41 43 53 20 56 35 2e 33
0: historical: 'IRDETO ACS V5.3
Blocked 2 same messages...
21:14:55.895: 0: atr checksum ok
21:14:55.895: 0: indicated wwt(T0)=1500 ms, bwt(T1)=1600 ms (at 3.5712 MHz)
21:14:55.926: 0: Init Irdeto card
21:14:55.926: 0: use Irdeto (at 6.0000 MHz) recalculated baudrate 10752
21:14:56.019: ACS Version 0606, CAID 0602, CoCo NLD
21:14:56.082: ASCII serial 4108496251U8270000A
21:14:56.144: Providers: 4 HEX Serial: 0B3886  HEX Base: 1C
21:14:56.618: didn't find Irdeto card specific certificate, falling back to default
21:14:56.618: didn't find default Irdeto certificate, please add one
21:14:56.618: now switch to Plain
21:14:56.742: 0: unknown (status: 00 92)
21:14:56.742: card didn't give a proper reply (buggy RSA unit?), trying to continue...
21:14:57.023: 0: CAM string rejected (status: 57 00)
21:14:57.023: camkey error
21:14:57.023: 0: can't initialise new card, ignoring port until card reinserted
21:21:36.313:
21:21:36.313: Ch: 160 - RTL 4
21:21:36.313: Programm crc: 80249D8C
21:21:36.360: PMT: ACamd_PMT.txt, search, not found PMT=00A0 (AND SID=4A39)
21:21:36.361: PMT: chcache.ini, 00A0,4A39,0604,00000000,0FA0,0035,RTL 4
21:21:36.362: 0x00A0 0x4A39 0x0604 0x00000000 0x0FA0 0x0035 11111110
21:21:36.452: Incomming PackageSize [184]
21:21:43.900:
21:21:43.900: Ch: 240 - Nederland 3
21:21:43.900: Programm crc: 8FDE91D5
21:21:43.928: PMT: ACamd_PMT.txt, search, not found PMT=00F0 (AND SID=1F43)
21:21:43.928: PMT: chcache.ini, 00F0,1F43,0604,00000000,0FA1,0035,Nederland 3
21:21:43.928: 0x00F0 0x1F43 0x0604 0x00000000 0x0FA1 0x0035 11111110
21:21:45.175:
21:21:45.175: Ch: 180 - Nederland 2
21:21:45.175: Programm crc: 784F0A11
21:21:45.205: PMT: ACamd_PMT.txt, search, not found PMT=00B4 (AND SID=1F45)
21:21:45.205: PMT: chcache.ini, 00B4,1F45,0604,00000000,0FA3,0035,Nederland 2
21:21:45.205: 0x00B4 0x1F45 0x0604 0x00000000 0x0FA3 0x0035 11111110
21:21:46.562:
21:21:46.562: Ch: 100 - Nederland 1
21:21:46.562: Programm crc: 3F14072C
21:21:46.599: PMT: ACamd_PMT.txt, search, not found PMT=0064 (AND SID=1F44)
21:21:46.599: 0x0064 0x1F44 0x0602 0x00000000 0x0000 0x0030 11111110
21:21:54.148:
21:21:54.148: Ch: 180 - Nederland 2
21:21:54.148: Programm crc: 784F0A11
21:21:54.148: PMT: ACamd_PMT.txt, search, not found PMT=00B4 (AND SID=1F45)
21:21:54.148: PMT: chcache.ini, 00B4,1F45,0604,00000000,0FA3,0035,Nederland 2
21:21:54.149: 0x00B4 0x1F45 0x0604 0x00000000 0x0FA3 0x0035 11111110
21:21:58.052:
21:21:58.052: Ch: 240 - Nederland 3
21:21:58.052: Programm crc: 8FDE91D5
21:21:58.052: PMT: ACamd_PMT.txt, search, not found PMT=00F0 (AND SID=1F43)
21:21:58.052: PMT: chcache.ini, 00F0,1F43,0604,00000000,0FA1,0035,Nederland 3
21:21:58.053: 0x00F0 0x1F43 0x0604 0x00000000 0x0FA1 0x0035 11111110
21:22:01.409:
21:22:01.409: Ch: 160 - RTL 4
21:22:01.409: Programm crc: 80249D8C
21:22:01.409: PMT: ACamd_PMT.txt, search, not found PMT=00A0 (AND SID=4A39)
21:22:01.409: PMT: chcache.ini, 00A0,4A39,0604,00000000,0FA0,0035,RTL 4
21:22:01.409: 0x00A0 0x4A39 0x0604 0x00000000 0x0FA0 0x0035 11111110
22:40:01.601: ACamd v0.6.2.0
22:40:31.236: ACamd v0.6.2.0
22:40:31.255: MD-API Version 01.06
22:40:31.264: systems: registering CA system Cardclient, pri -15, ident 1000
22:40:31.264: structloaders: registering loader cardclient config
22:40:31.264: cardclients: registering cardclient Newcamd
22:40:31.264: cardclients: registering cardclient Newcamd2
22:40:31.264: cardclients: registering cardclient CCcamN
22:40:31.264: cardclients: registering cardclient Radegast
22:40:31.264: cardclients: registering cardclient Camd35
22:40:31.264: structloaders: registering loader smartcard data
22:40:31.264: systems: registering CA system SC-Irdeto, pri -10, ident 1001
22:40:31.264: feature: using feature SMARTCARD
22:40:31.264: registering Irdeto smartcard (id 49726474)
22:40:31.264: systems: registering CA system SC-Seca, pri -10, ident 1002
22:40:31.264: registering Seca smartcard (id 53656361)
22:40:31.264: systems: registering CA system SC-Viaccess, pri -10, ident 1003
22:40:31.264: registering Viaccess smartcard (id 56696173)
22:40:31.264: systems: registering CA system SC-Conax, pri -10, ident 1004
22:40:31.264: registering Conax smartcard (id 436f6e78)
22:40:31.264: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
22:40:31.264: registering Cryptoworks smartcard (id 4372576f)
22:40:31.264: systems: registering CA system SC-Nagra, pri -10, ident 1006
22:40:31.264: registering Nagra smartcard (id 4e616772)
22:40:31.264: systems: registering CA system SC-NDS, pri -10, ident 1007
22:40:31.264: registering NDS smartcard (id 56694732)
22:40:31.271: Monitor listen on port 64420
22:40:31.304: Engine [MD-API]
22:40:31.304: loading smartcard data from C:\Program Files (x86)\DVBLogic\DVBLink\sources\TVsource_E30TC_1\Plugins\smartcard.conf
22:40:31.304: loaded 1 smartcard data from C:\Program Files (x86)\DVBLogic\DVBLink\sources\TVsource_E30TC_1\Plugins\smartcard.conf
22:40:31.305: loading cardclient config from C:\Program Files (x86)\DVBLogic\DVBLink\sources\TVsource_E30TC_1\Plugins\cardclient.conf
22:40:31.305: ** registered systems:
22:40:31.305: ** SC-NDS            (pri -10)
22:40:31.305: ** SC-Nagra          (pri -10)
22:40:31.305: ** SC-Cryptoworks    (pri -10)
22:40:31.305: ** SC-Conax          (pri -10)
22:40:31.305: ** SC-Viaccess       (pri -10)
22:40:31.305: ** SC-Seca           (pri -10)
22:40:31.305: ** SC-Irdeto         (pri -10)
22:40:31.305: ** Cardclient        (pri -15)
22:40:31.305: ANYSEE0: open serial port
22:40:31.305: Anysee Version: 3145728
22:40:31.316: Anysee Number Of Devices: 1
22:40:31.332: smartcards: added serial port ANYSEE0 as port 0 (normal CD, normal RESET, CLOCK 3571200)
22:40:31.333:
22:40:31.593: 0: new card inserted
22:40:31.593: 0: reseting card
22:40:31.593: 0: direct convention detected
22:40:31.593: 0: atr decoding TS=3b hist=15 Y1=90 TA1=21 F=558 D=1.000000 TD1=0e T=14 Y2=00
0: historical: 49 52 44 45 54 4f 20 41 43 53 20 56 35 2e 33
0: historical: 'IRDETO ACS V5.3
Blocked 2 same messages...
22:40:31.594: 0: atr checksum ok
22:40:31.594: 0: indicated wwt(T0)=1500 ms, bwt(T1)=1600 ms (at 3.5712 MHz)
22:40:31.594: 0: Init Irdeto card
22:40:31.594: 0: use Irdeto (at 6.0000 MHz) recalculated baudrate 10752
22:40:31.701: ACS Version 0606, CAID 0602, CoCo NLD
22:40:31.763: ASCII serial 4108496251U8270000A
22:40:31.821: Providers: 4 HEX Serial: 0B3886  HEX Base: 1C
22:40:32.730: provider 0 with ProvBase 0x00 ProvId 0x054d0f
22:40:32.839: ChanId 0xefff Date1 0x0d13 2012/12/12 Duration 0x46 2013/02/20
22:40:32.839: ChanId 0x270f Date1 0x0d13 2012/12/12 Duration 0x46 2013/02/20
22:40:32.839: ChanId 0x00d3 Date1 0x10db 2015/08/07 Duration 0x1e 2015/09/06
22:40:32.839: ChanId 0xffe0 Date1 0x10db 2015/08/07 Duration 0x1e 2015/09/06
22:40:32.839: ChanId 0x0384 Date1 0x10db 2015/08/07 Duration 0x1e 2015/09/06
22:40:33.016: provider 1 with ProvBase 0x01 ProvId 0x000600
22:40:33.191: provider 2 with ProvBase 0x02 ProvId 0xffffff
22:40:33.367: provider 3 with ProvBase 0x03 ProvId 0xffffff
22:40:33.483:
Blocked 1 same messages...
22:40:42.947: Ch: 160 - RTL 4
22:40:42.947: Programm crc: 80249D8C
22:40:42.948: PMT: ACamd_PMT.txt, search, not found PMT=00A0 (AND SID=4A39)
22:40:42.948: PMT: chcache.ini, 00A0,4A39,0604,00000000,0FA0,0035,RTL 4
22:40:42.950: 0x00A0 0x4A39 0x0604 0x00000000 0x0FA0 0x0035 11111110
22:40:43.053: Incomming PackageSize [184]
22:40:46.335: 0: chid 00D3   
22:40:46.554: 0: unknown (status: 29 00)
22:40:46.554: SC-Irdeto 0: ECM [1388][0602/00000000] Pro, CHID=00D3 (0.219)
22:40:46.554: SC-Irdeto 0: ECM [1388][0602/00000000] not able to decode
22:40:51.757:
22:40:51.757: Ch: 240 - Nederland 3
22:40:51.757: Programm crc: 8FDE91D5
22:40:51.757: PMT: ACamd_PMT.txt, search, not found PMT=00F0 (AND SID=1F43)
22:40:51.757: PMT: chcache.ini, 00F0,1F43,0604,00000000,0FA1,0035,Nederland 3
22:40:51.763: 0x00F0 0x1F43 0x0604 0x00000000 0x0FA1 0x0035 11111110
22:40:52.813:
22:40:52.813: Ch: 180 - Nederland 2
22:40:52.813: Programm crc: 784F0A11
22:40:52.813: PMT: ACamd_PMT.txt, search, not found PMT=00B4 (AND SID=1F45)
22:40:52.813: PMT: chcache.ini, 00B4,1F45,0604,00000000,0FA3,0035,Nederland 2
22:40:52.815: 0x00B4 0x1F45 0x0604 0x00000000 0x0FA3 0x0035 11111110
22:40:54.027:
22:40:54.027: Ch: 100 - Nederland 1
22:40:54.027: Programm crc: 3F14072C
22:40:54.027: PMT: ACamd_PMT.txt, search, not found PMT=0064 (AND SID=1F44)
22:40:54.029: 0x0064 0x1F44 0x0602 0x00000000 0x0000 0x0030 11111110
22:41:13.697:
22:41:13.697: Ch: 180 - Nederland 2
22:41:13.697: Programm crc: 784F0A11
22:41:13.697: PMT: ACamd_PMT.txt, search, not found PMT=00B4 (AND SID=1F45)
22:41:13.697: PMT: chcache.ini, 00B4,1F45,0604,00000000,0FA3,0035,Nederland 2
22:41:13.700: 0x00B4 0x1F45 0x0604 0x00000000 0x0FA3 0x0035 11111110
22:41:17.197: 0: chid 00D3   
22:41:17.412: 0: unknown (status: 29 00)
22:41:17.412: SC-Irdeto 0: ECM [138B][0602/00000000] Pro, CHID=00D3 (0.215)
22:41:17.412: SC-Irdeto 0: ECM [138B][0602/00000000] not able to decode
22:41:19.812: 0: unknown (status: 29 00)
22:41:19.812: SC-Irdeto 0: ECM [138B][0602/00000000] Pro, CHID=00D3 (0.215)
22:41:19.812: SC-Irdeto 0: ECM [138B][0602/00000000] not able to decode
22:41:21.825:
22:41:21.825: Ch: 240 - Nederland 3
22:41:21.825: Programm crc: 8FDE91D5
22:41:21.825: PMT: ACamd_PMT.txt, search, not found PMT=00F0 (AND SID=1F43)
22:41:21.825: PMT: chcache.ini, 00F0,1F43,0604,00000000,0FA1,0035,Nederland 3
22:41:21.828: 0x00F0 0x1F43 0x0604 0x00000000 0x0FA1 0x0035 11111110
22:41:23.743:
22:41:23.743: Ch: 180 - Nederland 2
22:41:23.743: Programm crc: 784F0A11
22:41:23.743: PMT: ACamd_PMT.txt, search, not found PMT=00B4 (AND SID=1F45)
22:41:23.743: PMT: chcache.ini, 00B4,1F45,0604,00000000,0FA3,0035,Nederland 2
22:41:23.749: 0x00B4 0x1F45 0x0604 0x00000000 0x0FA3 0x0035 11111110
22:41:24.929:
22:41:24.929: Ch: 240 - Nederland 3
22:41:24.929: Programm crc: 8FDE91D5
22:41:24.929: PMT: ACamd_PMT.txt, search, not found PMT=00F0 (AND SID=1F43)
22:41:24.929: PMT: chcache.ini, 00F0,1F43,0604,00000000,0FA1,0035,Nederland 3
22:41:24.932: 0x00F0 0x1F43 0x0604 0x00000000 0x0FA1 0x0035 11111110

wat zou ik nu nog kunnen testen

[GuiltyNL]

Er zit een fout in je smartcard config:

21:14:56.618: didn't find Irdeto card specific certificate, falling back to default
21:14:56.618: didn't find default Irdeto certificate, please add one
21:14:56.618: now switch to Plain
21:14:56.742: 0: unknown (status: 00 92)
21:14:56.742: card didn't give a proper reply (buggy RSA unit?), trying to continue...
21:14:57.023: 0: CAM string rejected (status: 57 00)
21:14:57.023: camkey error
21:14:57.023: 0: can't initialise new card, ignoring port until card reinserted

Heb je wel smartcard.conf in de juiste map staan? Met bijvoorbeeld deze inhoud:

Code:

irdeto: [0005] camkey 0102030405060708 8D826BA96BD7578E99700913FF578A572EA05BEE8FC5F41127C04518DD1116CBCF09700D4E53C0EC37C77C1E3A5B2D735DC1B893410634168D2B5E2340896B69
irdeto: [0605] camkey 0102030405060708 8D826BA96BD7578E99700913FF578A572EA05BEE8FC5F41127C04518DD1116CBCF09700D4E53C0EC37C77C1E3A5B2D735DC1B893410634168D2B5E2340896B69
irdeto: [0606] camkey 0102030405060708 8D826BA96BD7578E99700913FF578A572EA05BEE8FC5F41127C04518DD1116CBCF09700D4E53C0EC37C77C1E3A5B2D735DC1B893410634168D2B5E2340896B69
irdeto: [0607] camkey 0102030405060708 8D826BA96BD7578E99700913FF578A572EA05BEE8FC5F41127C04518DD1116CBCF09700D4E53C0EC37C77C1E3A5B2D735DC1B893410634168D2B5E2340896B69
irdeto: [0608] camkey 0102030405060708 8D826BA96BD7578E99700913FF578A572EA05BEE8FC5F41127C04518DD1116CBCF09700D4E53C0EC37C77C1E3A5B2D735DC1B893410634168D2B5E2340896B69
irdeto: [0609] camkey 0102030405060708 8D826BA96BD7578E99700913FF578A572EA05BEE8FC5F41127C04518DD1116CBCF09700D4E53C0EC37C77C1E3A5B2D735DC1B893410634168D2B5E2340896B69

Volgens je log laadt hij 3 sleutels in, ik ben benieuwd welke dat dan zijn. Voeg smartcard.conf eens toe hier als bijlage!

[charlyd]

dit is de laatste logging...

Code:

21:27:08.956: ACamd v0.6.2.0
21:27:08.971: MD-API Version 01.06
21:27:08.971: systems: registering CA system Cardclient, pri -15, ident 1000
21:27:08.971: structloaders: registering loader cardclient config
21:27:08.971: cardclients: registering cardclient Newcamd
21:27:08.971: cardclients: registering cardclient Newcamd2
21:27:08.971: cardclients: registering cardclient CCcamN
21:27:08.971: cardclients: registering cardclient Radegast
21:27:08.971: cardclients: registering cardclient Camd35
21:27:08.971: structloaders: registering loader smartcard data
21:27:08.971: systems: registering CA system SC-Irdeto, pri -10, ident 1001
21:27:08.971: feature: using feature SMARTCARD
21:27:08.971: registering Irdeto smartcard (id 49726474)
21:27:08.971: systems: registering CA system SC-Seca, pri -10, ident 1002
21:27:08.971: registering Seca smartcard (id 53656361)
21:27:08.971: systems: registering CA system SC-Viaccess, pri -10, ident 1003
21:27:08.971: registering Viaccess smartcard (id 56696173)
21:27:08.971: systems: registering CA system SC-Conax, pri -10, ident 1004
21:27:08.971: registering Conax smartcard (id 436f6e78)
21:27:08.971: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
21:27:08.971: registering Cryptoworks smartcard (id 4372576f)
21:27:08.971: systems: registering CA system SC-Nagra, pri -10, ident 1006
21:27:08.971: registering Nagra smartcard (id 4e616772)
21:27:08.971: systems: registering CA system SC-NDS, pri -10, ident 1007
21:27:08.971: registering NDS smartcard (id 56694732)
21:27:08.987: Monitor listen on port 59954
21:27:09.018: Engine [MD-API]
21:27:09.018: loading smartcard data from C:\Program Files (x86)\DVBLogic\DVBLink\sources\TVsource_E30TC_1\Plugins\smartcard.conf
21:27:09.018: loaded 7 smartcard data from C:\Program Files (x86)\DVBLogic\DVBLink\sources\TVsource_E30TC_1\Plugins\smartcard.conf
21:27:09.018: loading cardclient config from C:\Program Files (x86)\DVBLogic\DVBLink\sources\TVsource_E30TC_1\Plugins\cardclient.conf
21:27:09.018: ** registered systems:
21:27:09.018: ** SC-NDS            (pri -10)
21:27:09.018: ** SC-Nagra          (pri -10)
21:27:09.018: ** SC-Cryptoworks    (pri -10)
21:27:09.018: ** SC-Conax          (pri -10)
21:27:09.018: ** SC-Viaccess       (pri -10)
21:27:09.018: ** SC-Seca           (pri -10)
21:27:09.018: ** SC-Irdeto         (pri -10)
21:27:09.018: ** Cardclient        (pri -15)
21:27:09.018: ANYSEE0: open serial port
21:27:09.018: Anysee Version: 3145728
21:27:09.018: Anysee Number Of Devices: 1
21:27:09.034: smartcards: added serial port ANYSEE0 as port 0 (normal CD, normal RESET, CLOCK 3571200)
21:27:09.034:
21:27:09.289: 0: new card inserted
21:27:09.289: 0: reseting card
21:27:09.289: 0: direct convention detected
21:27:09.289: 0: atr decoding TS=3b hist=15 Y1=90 TA1=21 F=558 D=1.000000 TD1=0e T=14 Y2=00
0: historical: 49 52 44 45 54 4f 20 41 43 53 20 56 35 2e 33
0: historical: 'IRDETO ACS V5.3
Blocked 2 same messages...
21:27:09.289: 0: atr checksum ok
21:27:09.289: 0: indicated wwt(T0)=1500 ms, bwt(T1)=1600 ms (at 3.5712 MHz)
21:27:09.304: 0: Init Irdeto card
21:27:09.304: 0: use Irdeto (at 6.0000 MHz) recalculated baudrate 10752
21:27:09.419: ACS Version 0606, CAID 0602, CoCo NLD
21:27:09.497: ASCII serial 4108496251U8270000A
21:27:09.580: Providers: 4 HEX Serial: 0B3886  HEX Base: 1C
21:27:10.428: provider 0 with ProvBase 0x00 ProvId 0x054d0f
21:27:10.553: ChanId 0xefff Date1 0x0d13 2012/12/12 Duration 0x46 2013/02/20
21:27:10.553: ChanId 0x270f Date1 0x0d13 2012/12/12 Duration 0x46 2013/02/20
21:27:10.553: ChanId 0x00d3 Date1 0x10db 2015/08/07 Duration 0x1e 2015/09/06
21:27:10.553: ChanId 0xffe0 Date1 0x1152 2015/12/04 Duration 0x1e 2016/01/03
21:27:10.553: ChanId 0x0384 Date1 0x10db 2015/08/07 Duration 0x1e 2015/09/06
21:27:10.771: provider 1 with ProvBase 0x01 ProvId 0x000600
21:27:11.005: provider 2 with ProvBase 0x02 ProvId 0xffffff
21:27:11.224: provider 3 with ProvBase 0x03 ProvId 0xffffff
21:27:11.364:
Blocked 1 same messages...
21:27:34.898: Ch: 180 - Nederland 2
21:27:34.898: Programm crc: 784F0A11
21:27:34.898: PMT: ACamd_PMT.txt, search, not found PMT=00B4 (AND SID=1F45)
21:27:34.898: PMT: chcache.ini, 00B4,1F45,0604,00000000,0FA3,0035,Nederland 2
21:27:34.898: 0x00B4 0x1F45 0x0604 0x00000000 0x0FA3 0x0035 11111110
21:27:35.058: Incomming PackageSize [184]
21:27:38.478: 0: chid 00D3   
21:27:38.698: 0: unknown (status: 29 00)
21:27:38.698: SC-Irdeto 0: ECM [138B][0602/00000000] Pro, CHID=00D3 (0.220)
21:27:38.698: [i][b]SC-Irdeto 0: ECM [138B][0602/00000000] not able to decode[/b][/i]
21:27:47.508:
21:27:47.508: Ch: 100 - Nederland 1
21:27:47.508: Programm crc: 3F14072C
21:27:47.508: PMT: ACamd_PMT.txt, search, not found PMT=0064 (AND SID=1F44)
21:27:47.518: 0x0064 0x1F44 0x0602 0x00000000 0x0000 0x0030 11111110

denk dat hier iets moet zitten toch 

[Pascal-]

post ook je cardcleint.config is daar zal het fout in zitten.
Waarom worden alle mogelijke kaarten ingeladen in je smartcard.config je hebt alleen de Irdeto2 nodig de rest staat ook niet op de kaart van Ziggo.

[GuiltyNL]

Die cardclient.conf zou ik voor de zekerheid helemaal leeghalen, om de Anysee te testen met een kaart, is alleen smartcard.conf nodig en verder niets. Ik zie geen foutmelding meer dat hij je kaartversie in de smartcard.conf niet kan vinden, dus ik denk dat hij nu probeert om, zoals Pascal zegt, extern via een cardsharing server aan de gang te gaan in plaats van dat hij de lokale smartcard gebruikt om te decoderen.

Maar zip gewoon eens die Acamd plugin folder en hang dat bestand hier erbij, daar kunnen we wat mee. Een logfile zonder configuratie is lastig zoeken.

[charlyd]

ok hierbij de hele folder ik heb er twee bestanden uit gelaten ivm de grote van de toegestane upload.
de acamd.dll en MDAPIFilter.ax zijn eruit verwijderd ... er zit een screenshot extra bij van de juiste bestanden. dus incl. de twee bestanden en hun datums. in deze test heb ik wat heen en weer gezapt en bij ned 1 MCE gesloten en weer opnieuw opgestart... alle zenders in de logging behalve natuurlijk NED1 zwart beeld.

misschine extra info:  zodra ik de chcache.ini en de chidcache.ini verwijder worden deze met de smartcard setup niet aan gemaakt. na het starten (dus dus geen decodering) en met de setup met de c-lijnen worden deze wel aangemaakt.

PS:
Tuner E30TC icm smartcard rechtstreeks tunen(dvb-t) in mce werkt perfect maar met tvsource en acamd 6.20 en smartcard dus niet. ik hoop dat jullie me verder kunnen helpen...

[charlyd]

ik heb op het DVBlogic forum gelezen dat er meer mensen met E30TC + smartcard problemen hebben met TVsource 4.1.1 icm ACAMD 6.2 jullie iets van bekend...??

[GuiltyNL]

Ik draai uit mijn hoofd 4.1.0 en omdat dat uitstekend draait, heb ik 4.1.1 laten zitten. Ik ben nu naar je bestanden aan het kijken.

Aan je config zie ik niets geks, dat lijkt toch echt allemaal ok te zijn. Mijn vragen:

1) Heb je CNO.exe uitgeschakeld?
2) Heb je in TV Source de juiste BDA driver gekozen, dus niet een of andere MCE versie die bedoeld is voor CNO?

Probeer ook nog even die AcamdTMP map te legen.

Wat eventueel ook nog zou kunnen is dat je een heel nieuwe kaart hebt, waar die camkey niet mee werkt, maar dan zou je de eerste zijn. Het lijkt me niet waarschijnlijk.

[charlyd]

@GuiltyNL
bedankt voor je reactie.

ik herhaal even je vragen en zet er mijn info bij ok.

1) Heb je CNO.exe uitgeschakeld?  =>> beide zowel aan als uit.. geen resultaat
2) Heb je in TV Source de juiste BDA driver gekozen, dus niet een of andere MCE versie die bedoeld is voor CNO?
HELLUP.... hier ga ik de mist in ik heb de CNO driver...

stuurprogramma:  anysee BDA Capture Device (2011.11.30.AD01062044.Win7.X64)
               versie:   1.6.20.44   ( 30-11-2011 )

is dat voldoende info   mijn smartcard ( ik heb er 2....) begint met 4104 of 4108. beide werkt niet..

moet ik in de config bestanden in de acamd 6.20 nog zetten dat ik gebruik wil maken van de softcam in de tuner zelf??

[GuiltyNL]

Je hebt de goede hoor, die andere is een virtuele en heet iets van MCE huppeldepup.

Heb je je kaart ook getest in een normale decoder? Als het een nieuwe kaart is, heeft hij soms wat uurtjes nodig om alle EMM's en ECM's te verwerken.

[charlyd]

ja hoor de kaart werkt gewoon  het is een kaart met nummer 4108 weet niet of dat nog iets uitmaakt.

hierbij mijn log van de laatste 2 dagen incl wat zap werkt maar je ziet alleen NED1 ok de rest beeld zwart...toch mss TVsource versie?..
heb vanavond alles nog eens opnieuw geinstalleert in TVsource en mce..

binnnen TVsource kun je previewen maar deze start bij mij media player ipv VLC waardoor media player vast loopt.
ik zou voor TVsource de extensie koppeling in windows 7 moeten wijzigen. maar waar zit dat in windows 7 de locatie waar de extensies aan een programa gekoppelt staan. ok gevonden in het configuratie scherm nu ga ik testen en ik laat hier weten hoe het binnen TVsource uit pakt.

ik heb het nu bij beide tuners aan gekeken... geen van twee beeld. zelfde resultaat..
dus conclusie:

of het is TVsource Versie
of de Acamd 6.2 versie
lijkt me.....

nou ben ik toch nieuwsgierig.

[charlyd]

en hier van tuner 2    ook zwart via VLC player dus in de preview... binnen TVsource.

maw smartcard decodering doet het niet op beide tuners.
althans niet icm TVsource.....en acamd 6.2

ik zpou het nog met hadu kunnen testen met hoe is die config ik heb wel HADU.INI en HADU.DLL wat met er per smartcard in de HADU.INI ?  ik heb versie 0.1.2.7 is dat ok.?

en toen.