LEDSdriver 0.9.022 release notes

[hveijk]

LEDSdriver 0.9.12

- Supports a 3rd LED on the COM port (TXD)
- User defined events (control LEDs from the command line)
- Less blinking during suspend and resume

[hveijk]

LEDSdriver 0.9.013

- Uses a selected keyboard instead of all connected keyboards.
- No longer switches the keyboard functions (Num/Caps/Scroll Lock), only the LEDs.
- No longer interferes with the screensaver, idle detection etc.
- New events: playing, paused, muted en media center error.

[hveijk]

LEDSdriver - 0.9.014
====================
- 0000024: [Events] Use flags to define event characteristics (hveijk) - resolved.
- 0000027: [R&D] Refresh option for device list - resolved.
- 0000009: [Events] Active RDP sessions - resolved.
- 0000021: [Events] Suspend (S1/S3/S4) - resolved.
- 0000014: [Engine] cLedDeviceList to handle LED devices (hveijk) - resolved.
- 0000011: [Engine] Asynchronous control of LEDs - resolved.
- 0000004: [UI] Tabbed userinterface - resolved.
- 0000002: [Events] Detect extenders by their RDP session (hveijk) - resolved.
- 0000003: [Other] LOGDETECT command line option to log device detection details - resolved.
- 0000007: [Other] Exit immediately when run in a RDP session (hveijk) - resolved.

[hveijk]

LEDSdriver - 0.9.015
====================
- 0000006: [Engine] Blink rate per event instead of per device - resolved.
- 0000023: [Devices] Use input lines for device identification - resolved.
- 0000022: [Engine] Multi-color LED support - resolved.
- 0000041: [Engine] Store events per device (hveijk) - resolved.
- 0000039: [Devices] Switch of keyboard LEDs when the system powers down, not return to the function state - resolved.
- 0000010: [Engine] Collect all LED functionality in cLedEngine class - resolved.
- 0000036: [Installer] Prevent installing over newer version - resolved.
- 0000030: [Installer] Install without reboots - resolved.

[hveijk]

LEDSdriver - 0.9.016
====================
- 0000059: [Devices] Detect type of COM device and hardware ID - resolved.
- 0000058: [Engine] Some Prolilfc based USB to serial converters show random LED status after resume - resolved.
- 0000050: [UI] Hide events that are not available - resolved.
- 0000049: [Devices] No longer use Ring Indicate for device identification - resolved.
- 0000061: [UI] Force MessageBox buttons to be in English - resolved.

[hveijk]

LEDSdriver - 0.9.017
====================
- 0000076: [Devices] Support for single, inverted (normally on) LED - resolved.
- 0000077: [Engine] Pulse as LED state - resolved.
- 0000046: [Events] User activity - resolved.
- 0000068: [Installer] Do not restart ehtray if it was not running - resolved.
- 0000075: [Events] System required and display required - resolved.

[hveijk]

LEDSdriver - 0.9.019
====================
- 0000086: [Engine] LED switched off on standby when stanby is combined with another event (hveijk) - resolved.
- 0000079: [Engine] Use PWM to control LED intensity and colors (hveijk) - resolved.

[hveijk]

LEDSdriver - 0.9.020
====================
- 0000102: [Devices] Intensity control breaks functioning of single-color LEDs (hveijk) - resolved.

[hveijk]

LEDSdriver - 0.9.021
====================
- 0000134: [Engine] Support two LEDs without soldering (hveijk) - resolved.
- 0000136: [Engine] Support multiple simultanious instances (hveijk) - resolved.
- 0000135: [Engine] Dimmed state (hveijk) - resolved.
- 0000130: [Engine] Reserve all IDs that can be made by jumpers (hveijk) - resolved.
- 0000129: [Engine] Seporate color and state (blink for RGB LEDs) (hveijk) - resolved.

[hveijk]

LEDSdriver - 0.9.022
====================
- 0000138: [UI] Update donation link (hveijk) - resolved.
- 0000137: [Engine] Inverted outputs (ca) fail when not active (0.9.021) (hveijk) - resolved.